Eco-economic efficiency assessment of waste paper recycling into construction composites based on SDGS in the university ecosystem
DOI:
https://doi.org/10.26577/EJE201140326Abstract
This study evaluates the properties and economic efficiency of papercrete finishing products manufactured by recycling secondary cellulose waste within the “Zero Waste” concept. The analysis covered 20 formulations prepared according to a five-stage protocol in the laboratory of Khoja Akhmet Yasawi International Kazakh-Turkish University. As the paper-pulp content increased and the cement content decreased, compressive strength declined whereas water absorption increased. Among the tested formulations, sample S-09 provided the best balance between performance and resource efficiency. S-09 achieved a compressive strength of 6.8 MPa, an average density of 1100 kg/m³, and water absorption of 23.1%. On the basis of these measured properties, the composite is considered potentially suitable for non-load-bearing partition and finishing units, subject to full conformity assessment under ST RK EN 771-3-2011 and GOST 6133-2019. Formulations with a higher paper content also showed potential for use as non-structural thermal-insulation materials. From an economic and environmental perspective, implementing the S-09 formulation into production reduces initial raw material costs by cutting cement consumption, while the lightweight nature of the material optimizes transportation and supply chain expenses. The absence of the traditional high-temperature firing process lowers manufacturing energy consumption, and the recycling of waste paper reduces landfill burdens. The study results confirm that the proposed papercrete composite holds high commercial appeal and environmental sustainability under the principles of the circular economy and ESG standards.
Keywords: Papercrete, zero waste, waste paper recycling, compressive strength, density, circular economy, ESG, economic efficiency.








